IMPORTANT SAFETY INSTRUCTIONS
This machine conforms to current safety requirements. Inappropriate use can however lead to personal injury and property damage. Read the operating instructions carefully before starting to use this machine. Keep these instructions in a safe place, and make them available to future users.
Use
This machine is designed for commercial use and for
specialized applications only, as described in these Operating Instructions. Do not use for purposes other than those for which it was designed, as this might be dangerous. The programs are designed for laboratory glassware which are declared reprocessable. Regard the information from the glassware manufacturer.
Miele is not responsible for damages caused by improper use.
The installation of this unit in non stationary locations (e.g. ships)
must be performed by a qualified installer or service agency, in strict accordance with national and local safety regulations and standards.
Please pay attention to the following notes, to maintain safe procedures.
The machine should be commissioned and then maintained only by a Miele Service Technician. Repairs by unqualified
persons could be dangerous.
Do not install the machine in an area where a danger of explosion
or freezing may be present.
Be certain this appliance is properly installed and grounded by
an authorized technician. To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system checked by a qualified technician. The manufacturer cannot be held responsible for damage or injury caused by the lack of or inadequacy of an effective grounding system (e.g. electric shock).
A damaged machine is dangerous. Turn off the machine immediately at
the main switch and call the Miele Service Department.
Personnel operating the machine should be trained regularly.
Children and untrained personnel must not be allowed access to the machine or its controls.
4
