DI-Water connection | Miele G 7835 manual

Plumbing

DI-Water connection

The machine comes with a standard connection for a pressurized DI system. The recommended water pressure (flow rate) is 25 - 60 psi however, water pressure of 10 - 147 psi is acceptable.

^The DI pressure-tested hose (marked "H2O pure") with a 3/4" (2 cm) hose thread must be connected to the on-site water valve for DI purified water.

,If the DI water connection is not used, the electronics must be reprogrammed by a Miele technician. The water intake hose remains at the rear side of the machine.

45

Image 45

Miele G 7835 operating instructions DI-Water connection

Contents

Laboratory glassware washer G Contents Contents Use Important Safety Instructions Important Safety Instructions Important Safety Instructions Disposal of an old appliance Using accessories Electronic controls Guide to the machine Display Door switch h Start buttonOn/Off button Cursor left Cursor right Guide to the machine Electric door lock Opening and closing the doorOpening the door To close the door Water softener Select Unit Setting the water softenerEnter Water Hardness Softener Capacity Filling the salt reservoir Salt indicator Mobile unit coding Automatic mobile unit recognition AWK Mobile unit coding strip Setting mobile unit coding Set the program place coding Applications Preparing the items for cleaningLoading the machine Removing excess soils Applications To adjust the upper basket Height adjustable top basketSpring adapter water connection Example upper basket O 190/1 and lower basket U Injector unit 1/1 With connection to TA Laboratory glassware LG Adding of liquid detergents and neutralizers Preparing the DOS dispensersAdditional DOS modules optional Filling the containers with liquid cleaning agents Priming the liquid dispensing systems Dispensing system maintenanceExternal Dispensing systems Optional Operation Power switchTurning on To change the operating level Starting a program Fixed programFree program selection Program sequence Turning offAutomatic mobile unit recognition AWK To change or cancel a program Operating levels B or DOperating levels a or C Cancelling a program Serial interface Cleaning and Care Cleaning the filters in the wash cabinetCleaning the coarse filter Cleaning the fine, flat and micro-fine filters Tilt the locking clamp to the side Cleaning the drain pump and non-return valve Cleaning the control panel Cleaning the water inlet filtersCleaning the exterior Cleaning the filter Drying unit TA Cleaning and care Changing the coarse filterOpen the door of the storage cabinet Replacing the HEPA-Filter Frequently asked questions After sales service Page Installation Instructions Caring for the environment Disposal of the packing materialsDisposal of an old appliance Leveling the legs InstallationRemoving the lid if necessary Protecting the countertop depending on model Water inlet Plumbing DI-Water connection Drainage This Appliance Must be Grounded Electrical connection Grounding the machine Re-assembling the service panel English Metric Technical DataPage Page All rights reserved/3404