Priming the liquid dispensing systems, Optional | Miele G 7835

Adding of liquid detergents and neutralizers

Priming the liquid dispensing systems

Before the machine is first used, and later if one or more containers has been allowed to empty, the dispensing system(s) for liquid media must be vented.

^Press the ON/OFF I-0button.

^Select operating level "B".

^Select from the following as required: Program DOS 1-FILL

Program DOS 3-FILL

(see under "Operation - B. Free program selection").

Optional:

Program DOS 2-FILL Program DOS 4-FILL

(if DOS 2 and/or DOS 4 pumps have been built in).

^Press the "Start" 6 button.

The DOS-FILL Service Program are allocated by default to program places 58-61, but they can be allocated to other program places.

Dispensing system maintenance

To ensure safe function the following maintenance should be carried out by a Miele Service Technician at specified intervals.

Every 12-18 months:

Inspect the hoses in the dispensing system(s). Replace if necessary.

External Dispensing systems

If external pumps are to be used for dispensing liquid detergent, please inform the Miele Technical Service Department. The notes in the Programming Manual under "Machine functions" must be observed.

25

Image 25

Miele G 7835 Priming the liquid dispensing systems, Dispensing system maintenance, External Dispensing systems, Optional

Contents

Laboratory glassware washer G Contents Contents Use Important Safety Instructions Important Safety Instructions Important Safety Instructions Disposal of an old appliance Using accessories Electronic controls Guide to the machine Display Door switch h Start buttonOn/Off button Cursor left Cursor right Guide to the machine Electric door lock Opening and closing the doorOpening the door To close the door Water softener Select Unit Setting the water softenerEnter Water Hardness Softener Capacity Filling the salt reservoir Salt indicator Mobile unit coding Automatic mobile unit recognition AWK Mobile unit coding strip Setting mobile unit coding Set the program place coding Applications Preparing the items for cleaningLoading the machine Removing excess soils Applications To adjust the upper basket Height adjustable top basketSpring adapter water connection Example upper basket O 190/1 and lower basket U Injector unit 1/1 With connection to TA Laboratory glassware LG Preparing the DOS dispensers Adding of liquid detergents and neutralizersAdditional DOS modules optional Filling the containers with liquid cleaning agents Priming the liquid dispensing systems Dispensing system maintenanceExternal Dispensing systems Optional Operation Power switchTurning on To change the operating level Fixed program Starting a programFree program selection Turning off Program sequenceAutomatic mobile unit recognition AWK Operating levels B or D To change or cancel a programOperating levels a or C Cancelling a program Serial interface Cleaning the filters in the wash cabinet Cleaning and CareCleaning the coarse filter Cleaning the fine, flat and micro-fine filters Tilt the locking clamp to the side Cleaning the drain pump and non-return valve Cleaning the control panel Cleaning the water inlet filtersCleaning the exterior Cleaning the filter Changing the coarse filter Drying unit TA Cleaning and careOpen the door of the storage cabinet Replacing the HEPA-Filter Frequently asked questions After sales service Page Installation Instructions Disposal of the packing materials Caring for the environmentDisposal of an old appliance Leveling the legs InstallationRemoving the lid if necessary Protecting the countertop depending on model Water inlet Plumbing DI-Water connection Drainage This Appliance Must be Grounded Electrical connection Grounding the machine Re-assembling the service panel English Metric Technical DataPage Page All rights reserved/3404