Serial interface | Miele G 7835 instruction

Serial interface

Each machine can be supplied with a 5 m long interface cable for data transfer between the Profitronic system and an external report printer or PC.

The serial interface is RS 232 compatible.

Various printers can be used as external printers:

–Epson-compatible sign-set

–HP LaserJet

For the interface configurations see "PC/Printer Function" in the "Programming Manual".

The address of the 9-pole pin sub-D plug of the serial interface cable: 5GND (ground)

3TXD (transmit) 2RXD (receive)

1-4-6 (linked)

7-8 (linked)

A standard null-modem or LapLink cable can be connected.

The extension cable to the printer/PC must not exceed 13 m.

Please note the following when connecting a printer or PC:

–Only use an industry-standard PC or printer.

–When installing the machine take the dimensions of the printer/PC into account.

The report print-out documents the time along with the:

–Date and machine number,

–Program start (with program place and program name),

–Dispensing system with dispensing temperature and dispensing concentration for each program block,

–Effective time successfully completed with required temperature reached and time for each program block,

–Achieved temperature and time of day required in the drying sequence

–All faults (e.g. water inlet blocked),

–All manual interventions (start, stop, interruptions to power supply),

–Program end.

31

Image 31

Miele G 7835 operating instructions Serial interface

Contents

Laboratory glassware washer G Contents Contents Use Important Safety Instructions Important Safety Instructions Important Safety Instructions Disposal of an old appliance Using accessories Electronic controls Guide to the machine Cursor right Door switch h Start buttonDisplay On/Off button Cursor left Guide to the machine To close the door Opening and closing the doorElectric door lock Opening the door Water softener Softener Capacity Setting the water softenerSelect Unit Enter Water Hardness Filling the salt reservoir Salt indicator Mobile unit coding Automatic mobile unit recognition AWK Mobile unit coding strip Setting mobile unit coding Set the program place coding Removing excess soils Preparing the items for cleaningApplications Loading the machine Applications Example upper basket O 190/1 and lower basket U Height adjustable top basketTo adjust the upper basket Spring adapter water connection Injector unit 1/1 With connection to TA Laboratory glassware LG Preparing the DOS dispensers Adding of liquid detergents and neutralizersAdditional DOS modules optional Filling the containers with liquid cleaning agents Optional Dispensing system maintenancePriming the liquid dispensing systems External Dispensing systems To change the operating level Power switchOperation Turning on Fixed program Starting a programFree program selection Turning off Program sequenceAutomatic mobile unit recognition AWK Operating levels B or D To change or cancel a programOperating levels a or C Cancelling a program Serial interface Cleaning the filters in the wash cabinet Cleaning and CareCleaning the coarse filter Cleaning the fine, flat and micro-fine filters Tilt the locking clamp to the side Cleaning the drain pump and non-return valve Cleaning the filter Cleaning the water inlet filtersCleaning the control panel Cleaning the exterior Changing the coarse filter Drying unit TA Cleaning and careOpen the door of the storage cabinet Replacing the HEPA-Filter Frequently asked questions After sales service Page Installation Instructions Disposal of the packing materials Caring for the environmentDisposal of an old appliance Protecting the countertop depending on model InstallationLeveling the legs Removing the lid if necessary Water inlet Plumbing DI-Water connection Drainage This Appliance Must be Grounded Electrical connection Grounding the machine Re-assembling the service panel English Metric Technical DataPage Page All rights reserved/3404