Dimâge Scan Dual II 69
Setting the White Point
TONE CURVES/HISTOGRAM
1. Double-click on .
• The Point Value Setting dialog box is
displayed.
2. Input the desired black point value.
3. Click on .
• The cursor changes to the black dropper
shape.
4. Click the desired shadow point of
the image.
• The image is corrected so that the point
you clicked is shadow point.The color of the shadow
point is the black point value you input in step 2.
• The change will be reflected in the prescan image.
Setting the White or Black points
This function allows you to correct the highlight or shadow
point to the specified value.
• Changes are automatically applied to the prescan image.
1. Double-click on .
• The Point Value Setting dialog box is displayed.
2. Input the desired white point value.
3. Click on .
• The cursor changes to the white dropper shape.
4. Click the desired highlight point of the image.
• The image is corrected so that the point you clicked is
highlight point.The color of the highlight point is the white
dropper value you input in step 2.
• The change will be reflected in the prescan image.
Point Value Setting
dialog box
• When the film type is set to
the color mode.
• When the film type is set to
the monochrome mode.
Setting the Black point