Minolta Pi3505e, Pi3505e/PS D-4

D-4

2. Remove the 3 screws.

✽Access screw ➁ through the space between the scanner and the document cover after

opening the cover.

Tighten screw ➂ together with the CLAN finger.

Use a short screwdriver on screws ➁ and ➂.

3. Remove the CLAN circuit board.

C4514U008AA

➀

➁

➂

CLAN finger

4514U007AB

CLAN circuit board

✽Before installing the CLAN circuit board, check that

the OPE cable does not cover the connector for

connecting the CLAN circuit board, and then install

the circuit board

4514U005AB

✽When installing the CLAN circuit board, press

down at the two points indicated by arrows, and

then firmly insert the connectors. (Do not touch

any soldered areas.)

4514U007AA

Contents

Main P-1 1. SAFETY PRECAUTIONS FOR INSPECTION AND SERVICE 1-1. Warning P-2 P-3 1-2. Caution P-4 P-5 1-3. Used Batteries Precautions P-6 1-4. Other Precautions 1-5. Precautions for Service P-7 P-8 P-9 Page CONTENTS GENERAL, MECHANICAL/ELECTRICAL DIS/REASSEMBLY, ADJUSTMENT DISPLAYS/SETTINGS TROUBLESHOOTING Page Page Page M-1 1. SPECIFICATIONS 1-1. Controller Specificationss M-2 1-2. Supporting Client Specifications M-3 2. FUNCTION OVERVIEW OF CIRCUIT BOARDS 2-1. CLAN circuit board M-4 Page Page D-1 1. DISASSEMBLY/REASSEMBLY 1-1. Removing parts D-2 Page D-4 D-5 D-6 D-7 D-8 1-2. Checking the assembly Page Page S-1 1. CHECKING TOUCH PANEL DISPLAYS 1-1. Printer controller/Network interface unit S-2 2. CONTROLLER NETWORK SETTING S-3 3. SOFT SWITCH 3-1. Changing soft switch settings S-4 S-5 3-2. Soft switch settings S-6 355 Bit: 00110000 HEX:20 S-7 413 Bit: 00000100 HEX:04 432 Bit: 00000101 HEX:05 S-8 Note.*1: Outside North America 440 Bit: 00010010 HEX:12 S-9 441 Bit: 10000000 HEX:80 442 Bit: 00000001 HEX:01 443 Bit: 00000000 HEX:00 S-10 444 Bit: 00000000 HEX:00 S-11 Note.*1: Outside North America 445 Bit: 01011100 HEX:5C S-12 S-13 S-14 S-15 Page Page Page T-1 1. PROBLEMS WHILE PRINTING FROM A COMPUTER 1-1. Computer printing problems T-2 T-3 T-4 T-5 T-6 T-7 T-8 T-9 T-1 0 T-1 1 T-1 2 2. WARM RESTART 2-1. Overview 2-2. Warm restart procedure 2-3. Warm restart operation