Minolta Pi3505e/PS Ever, depending on, Application, the printing, Orientation selected from

Num-	Symptom	Possible Cause	Remedy	Description
ber
14	The desired	Additional optional	Check that the	In order to specify the 3rd
	paper source	paper feed units are	additional paper	or 4th paper drawer as
	cannot be	not installed, or the	feed units are	the paper source, addi-
	selected.	3rd and 4th paper	installed, and	tional optional paper feed
		drawers cannot be	check the selected	units must be installed. In
		selected from the	settings on the	addition, if the 3rd and 4th
		paper source options	Device Options	paper drawers are not
		on the Device	Setting tab.	detected, they cannot be
		Options Setting tab.		selected from the paper
				source options on the
				Device Options Setting
				tab.
		Postcards, enve-	Check the paper	If postcards are selected
		lopes or a non-stan-	size.	as the paper size, the
		dard size is selected		“Auto Paper” and the 1st
		as the paper size.		through 4th paper draw-
				ers cannot be selected.
15	The paper	Depending on the	Specify the paper	The paper source can be
	source is not	application, the	source by using	specified both from the
	as specified.	paper source speci-	the Print command	printer’s Properties dia-
		fied from the printer's	in the application.	log box and by using the
		Properties dialog		Print command in most
		box is not applied.		applications; however,
				depending on the applica-
		Paper with the	Load paper with
				tion, the paper source
		appropriate size is	the appropriate
				selected from the printer’s
		not loaded in the	size into the speci-
		specified paper	fied paper drawer.	Properties dialog box
				may not be applied.
		drawer.
16	The printing	Depending on the	Specify the print-	The printing orientation
	orientation is	application, the print-	ing orientation by	can be specified both
	not as speci-	ing orientation speci-	using the Print	from the printer’s Proper-
	fied.	fied from the printer’s	command in the	ties dialog box and by
		Properties dialog	application.	using the Print command
		box is not applied.		in most applications; how-
				ever, depending on the
				application, the printing
				orientation selected from
				the printer’s Properties
				dialog box may not be
				applied.

T-5