Minolta Pi3505e, Pi3505e/PS T-1 2

T-1 2

2. WARM RESTART

2-1. Overview

•Perform this operation when entering Maintenance Mode and when the touch panel but-

tons cannot be used (do not operate correctly) if a malfunction occurs while the machine

is running (sending, receiving, copying, etc.).

Pressing this button initializes the unit, but documents stored in the unit's memory and

program settings are saved. After the unit is initialized, the specified operations are per-

formed on the documents stored in the unit's memory (except with copies and computer

printouts).

2-2. Warm restart procedure

•Press the button in the small hole on the side of the control panel.

2-3. Warm restart operation

•The warm restart operation begins when the operation described in 2-2 is performed.

At this time, the touch panel goes off.

After approximately 5 seconds, the warm restart operation is completed and the initial

screen appears in the touch panel. Then, the specified operations are performed on the

documents stored in the unit’s memory.

Control panel

Press the button in the small hole on

the side of the control panel.

4384S501CA

Contents

Main P-1 1. SAFETY PRECAUTIONS FOR INSPECTION AND SERVICE 1-1. Warning P-2 P-3 1-2. Caution P-4 P-5 1-3. Used Batteries Precautions P-6 1-4. Other Precautions 1-5. Precautions for Service P-7 P-8 P-9 Page CONTENTS GENERAL, MECHANICAL/ELECTRICAL DIS/REASSEMBLY, ADJUSTMENT DISPLAYS/SETTINGS TROUBLESHOOTING Page Page Page M-1 1. SPECIFICATIONS 1-1. Controller Specificationss M-2 1-2. Supporting Client Specifications M-3 2. FUNCTION OVERVIEW OF CIRCUIT BOARDS 2-1. CLAN circuit board M-4 Page Page D-1 1. DISASSEMBLY/REASSEMBLY 1-1. Removing parts D-2 Page D-4 D-5 D-6 D-7 D-8 1-2. Checking the assembly Page Page S-1 1. CHECKING TOUCH PANEL DISPLAYS 1-1. Printer controller/Network interface unit S-2 2. CONTROLLER NETWORK SETTING S-3 3. SOFT SWITCH 3-1. Changing soft switch settings S-4 S-5 3-2. Soft switch settings S-6 355 Bit: 00110000 HEX:20 S-7 413 Bit: 00000100 HEX:04 432 Bit: 00000101 HEX:05 S-8 Note.*1: Outside North America 440 Bit: 00010010 HEX:12 S-9 441 Bit: 10000000 HEX:80 442 Bit: 00000001 HEX:01 443 Bit: 00000000 HEX:00 S-10 444 Bit: 00000000 HEX:00 S-11 Note.*1: Outside North America 445 Bit: 01011100 HEX:5C S-12 S-13 S-14 S-15 Page Page Page T-1 1. PROBLEMS WHILE PRINTING FROM A COMPUTER 1-1. Computer printing problems T-2 T-3 T-4 T-5 T-6 T-7 T-8 T-9 T-1 0 T-1 1 T-1 2 2. WARM RESTART 2-1. Overview 2-2. Warm restart procedure 2-3. Warm restart operation