Copyright, 7662-4513-11 | Minolta Pi3505e/PS specification

Copyright

2003 MINOLTA CO., LTD.

Use of this manual should be strictly supervised to avoid disclosure of confidential information.

MINOLTA Co.,Ltd.

7662-4513-11

Image 62

Minolta Pi3505e/PS service manual Copyright, 7662-4513-11

Contents

Pi3505e Pi3505e/PS Safety Precautions for Inspection and Service Always observe precautions Be careful with the high-voltage parts Do not throw toner or the toner bottle into a fireUse the specified parts Do not work with wet hands Precautions for Service Jobs Do not touch a high-temperature partRestore all parts and harnesses to their original positions Maintain a grounded connection at all times Precautions for storing the toner or imaging cartridge Precautions for Servicing with Covers and Parts RemovedPrecautions for the Working Environment Germany Used Batteries PrecautionsALL Areas Vorsicht Precautions Before Service Other PrecautionsPrecautions for Service How to Use this Book Handling of PWBs During Transportation/Storage Precautions for Dis/ReassemblyPrecautions for Circuit Inspection Handling of Other Parts Handling of the PC Drum Handling of the Imaging Cartridge and Print Unit Page Contents Page General MECHANICAL/ELECTRICAL Page Specifications Controller Specificationss CPU Supporting Client SpecificationsIBM PC and Compatible Computers Apple Macintosh Computers Pi3505e/PS only Overview Function Overview of Circuit BoardsClan circuit board Functions Copier has not been turned on LED indicatorsBlock Diagram LAN is not connected correctly DIS/REASSEMBLY Adjustment Page Removing the copier covers DISASSEMBLY/REASSEMBLYRemoving parts Remove the connector bracket 1 screw Remove the reinforcing plate 4 screws CN5 Removing the Clan circuit boardCN4 Remove the Clan circuit board Expansion slot 2 CN5 CN3Expansion slot 1 CN4 Removing the expansion hard disk drive CN1 CN2 Checking the operation of the printer controller Checking the assemblyRemove the Compact Flash card DISPLAYS/SETTINGS Page Checking Touch Panel Displays Printer controller/Network interface unit Starting PageScope Light Controller Network SettingAssigning the IP Address Displaying the setting screen from Tech. Rep. Mode Soft SwitchChanging soft switch settings Page Soft switch settings Specifying Printer Function Soft Switch Settings Mode Factory Setting 355 Bit HEX20 Bit Bit HEX05 Mode Factory SettingBit HEX04 Mode Factory Setting 440 Bit HEX12 North America Bit HEX00 Bit HEX80Bit HEX01 Mode Factory Setting 444 Bit HEX00 Bit 000000 Courier Mode Factory Setting 445 Bit HEX5C Bit HEX30 Mode Factory Setting 449 Bit HEX00HEX3C HEXE8 Bit HEX03 HEX0F HEX8C Bit HEX23 Page Troubleshooting Page Nections so that a Printer buffer Switch is not being Used Problems While Printing from a ComputerComputer printing problems Reduced As overlapping images Drawer, depending on Properties dialog box May not be applied Orientation selected from Ever, depending onApplication, the printing Printer’s Properties Copier to be printed Copies are not printed Copies is Specified from Copy by usingHas priority differs Correctly, refer to Order to specify booklet Punched at the top Type and size Overhead projector trans SpecifiedTation, holes cannot be Overhead projector Transparency inter Specify the paper Inter Interleaves or Num Symptom Possible Cause Remedy Description Ber CoverOrientation settings speci Overview Warm restart procedureWarm Restart Warm restart operation Copyright 7662-4513-11