P-9
NOTES
• Even when the PC Drum is only locally dirtied, wipe the entire surface.
• Do not expose the PC Drum to direct sunlight. Clean it as quickly as possible even under
interior illumination.
• If dirt remains after cleaning, repeat the entire procedure from the beginning one more
time.
9. Handling of the Imaging Cartridge and Print Unit
✽Only for Products Employing an Imaging Cartridge and Print Unit.
During Transportation/Storage
•The storage temperature is in the range between –20 °C and +40 °C.
•In summer, avoid leaving the Imaging Cartridge and Print Unit in a car for a long time.
Handling
•Store the Imaging Cartridge and Print Unit in a place that is not exposed to direct sun-
light.
Precautionary Information on the PC Drum Inside the Imaging Cartridge and Print Unit.
•Use care not to contaminate the surface of the PC Drum with oil-base solvent, finger-
prints, and other foreign matter.
•Do not scratch the surface of the PC Drum.
•Do not attempt to wipe clean the surface of the PC Drum.
C. Soak a small amount of either ethyl alcohol or iso-
propyl alcohol into a clean, unused Dust-Free Cot-
ton Pad which has been folded over into quarters.
Now, wipe the surface of the PC Drum in one con-
tinuous movement from its rear edge to its front
edge and off its surface one to two times.
✽Never move the Pad back and forth.
1076D003
D. Using the SAME face of the Pad, repeat the proce-
dure explained in the latter half of step 3 until the
entire surface of the PC Drum has been wiped.
Always OVERLAP the areas when wiping. Two
complete turns of the PC Drum would be appropri-
ate for cleaning.
1076D004