Remote Control, Overview, Vol | Mitsubishi WD-52631 guide

34Chapter 3. TV Operation

Remote Control

Overview

Figure 1, next page

1.Slide Switch: Selects the A/V device to be controlled by the remote control. Set the slide switch to TV for operation of the TV and IEEE 1394 devices. Control of other device types requires programing (see chapter 3,

“TV Operation”).

2.	SLEEP: Sets the TV to turn off within 2 hours. See the
	next page for instructions.
3.	Digits/Letters: Allow you to tune to a channel by
	entering channel numbers; press ENTER for faster
	tuning. Use numbers and the CANCEL key to enter digital
	sub-channels. Also use for entering information into
	menus.
	To select letters when naming channels, repeatedly
	press the associated			number key. The following
	special characters are available with the 1 and 0 keys:

			1	!	&	blank space
			0	/	*	-
4. —/CANCEL (SUB-Channel/CANCEL): When entering digital
	channel numbers, adds a separator between main
	and sub-channel numbers. Clears FAV and some
	menu entries.
5.	POWER: Turns TV power on and off.
6.	QV (QuickView™): Switches between the current
	channel and the last channel viewed.
7.	MUTE: Turns TV sound off or on.
8.	SPLIT:	Turns Split Screen mode on and off.
9.	VOL	/ (Volume Up/Down): Changes sound level.

10.CH/PAGE / (Channel or Page Up/Down): Scans up or down through memorized channels. Pages up and down through screens when used with ChannelView™.

11FAV (Favorites): Scans through memorized lists of favorite channels. See “Channel Menu” in chapter 4,

“TV Menu Settings,” for more information.

12.FORMAT: Changes the shape and size of the main TV picture. When in Split Screen mode, changes the

Note: The TV’s remote control can operate other audio/video devices.

•See chapter 5, “Operating Other Devices with the Remote Control” for:

instructions on programming the remote.

a list of functions available for controlling other devices.

•For control of IEEE 1394 devices, see chapter 7.

size of the split images while maintaining their aspect ratios.

13.INPUT: Displays the Input Selection menu from which you can select an input source to view, such as an antenna input (ANT 1/2) or a connected device.

14. (Adjust Up/down/Left/Right): Navigate menus and change settings.

15.ENTER: Selects a channel number or menu item.

16.GUIDE: Displays or removes ChannelView™ on-screen channel listing for ANT 1 and ANT 2.

17.INFO: Displays an on-screen summary of the current device in use and any broadcast information available, including current V-Chip information. See chapter 3,

“TV Operation,” for details.

18.AUDIO: Selects individual audio settings for adjustment.

19.VIDEO: Selects individual video settings for adjustment.

20.MENU: Displays the main TV menu using the on-screen menu system. When a sub-menu is open, backs up one level.

21.EXIT: Closes all TV on-screen menus and displays and returns to normal TV viewing.

22. F1–F4:When programmed, work like the A, B, C, D buttons on some cable boxes and satellite receiv- ers. Program the remote control for your equipment and test the keys. See chapter 5, “Operating Other Devices with the Remote Control.”

24. (Pause): Freezes a broadcast TV picture when no Split Screen image is displayed. When Split Screen is displayed, freezes the sub-picture. See below for use with recordable media.

Record/Playback Keys

To enable the recording and playback functions, program the remote for your VCR, DVR, or DVD player/recorder and set the slide switch to VCR or DVD. See chapter 5 for instruc- tions on programming the remote. If you have an IEEE 1394 device, see chapter 7 on IEEE 1394 devices.

23. (Record): Records with a VCR, DVR, or DVD recorder.