Menu operation (continued)
Menu Options
Set the following options provided in the respective menus.
1. QUICK MENU
Menu option | Setting | Feature description | |
|
|
| |
| AUTO | Automatically sets an optimal color balance based on the input signal. | |
| Use this setting for most cases. | ||
|
| ||
|
|
| |
COLOR ENHANCER | PRESENTATION | Makes projected images bright and crisp. | |
|
| ||
STANDARD | Makes projected images look natural. | ||
| |||
|
|
| |
| THEATER | Makes projected images soft and smooth. Best suited for movies. | |
|
|
| |
| USER | Reflected by the value set in IMAGE menu. (See page 27.) | |
|
|
| |
CONTRAST | ±30 | Adjusts the contrast of projected images. (See page 27.) | |
|
|
| |
BRIGHTNESS | ±30 | Adjusts the brightness of projected images. (See page 27.) | |
|
|
| |
COLOR TEMP. | 4 options | Adjusts the color temperature. (See page 27.) | |
|
|
| |
SHARPNESS | ±5 | Adjusts the sharpness of projected images. (See page 27.) | |
|
|
| |
| STANDARD | Select this setting when you want to view images in a | |
|
|
| |
|
| Select this setting when you want to view images at a moderate light | |
LAMP MODE |
| intensity. The operating sound is consequently reduced, and the lamp | |
LOW | lifetime becomes longer. | ||
| |||
|
| • When this mode is switched, projected images may flicker. | |
|
| • If this mode is frequently switched, the lamp may be deteriorated. | |
|
|
| |
| AUTO | Select to change the aspect ratio automatically depending on the input | |
| signal. (Select this option for normal use.) | ||
|
| ||
|
|
| |
ASPECT | 16:9 | Select to project images in full size (1920 x 1080 pixels) irrespective of | |
| type of input signal. | ||
|
| ||
|
|
| |
| NATIVE | Select to project images in their original size as input. | |
|
|
| |
USER MENU |
| Displays the menu item selected in SELECT USER MENU. | |
|
|
| |
SELECT USER MENU |
| Select the item to display in USER MENU. | |
|
|
| |
DETAIL MENU |
| Moves to DETAIL MENU. | |
|
|
|
QUICK MENU |
| |
COLOR | AUTO | |
ENHANCER | ||
| ||
CONTRAST | 0 | |
BRIGHTNESS | 0 | |
COLOR TEMP. | STANDARD | |
SHARPNESS | 0 | |
LAMP MODE | STANDARD | |
ASPECT | AUTO | |
USER MENU |
| |
SELECT | COLOR | |
USER MENU | ||
| ||
DETAIL MENU | OK |
•You cannot adjust COLOR TEMP. when WALL SCREEN in the INSTALLATION menu is set to other than OFF.
•When COLOR ENHANCER is switched, projected images may be distorted.
•The STANDARD lamp mode is activated by default whenever the projector is turned on. When the LOW LAMP MODE has been chosen, the default STANDARD lamp mode is switched to the LOW lamp mode in 1 minute.
2. INFORMATION menu
Menu option | Feature description | |
|
| |
| This menu shows a lamp operating time (hour) calculated assuming that LAMP MODE is LOW. | |
| • When the LAMP MODE is STANDARD, this menu shows a longer lamp operating time than | |
| the actual time. (See page 38 for the interval of lamp replacement.) | |
LAMP TIME (LOW) | • When the lamp operating time is 0 to 10 hours, "0H" is displayed. When the lamp operating | |
time exceeds 10 hours, the actual hours are displayed. | ||
| ||
| • When the lamp operating time reaches 3750 hours, the bar turns yellow. When it reaches | |
| 4750 hours, the bar turns red. | |
| (The lamp lifetime is 5000 hours.) | |
|
| |
INPUT | Indicates the name of the terminal to which the currently projected video signal is being input. | |
|
| |
RESOLUTION | Indicates the resolution of the currently projected video signal. | |
| ||
VERTICAL FREQUENCY Indicates the vertical frequency of the currently projected video signal. | ||
|
| |
HORIZONTAL FRE- | Indicates the horizontal frequency of the currently projected video signal. | |
QUENCY | ||
| ||
|
| |
SYNC. TYPE | Indicates the type of the sync signal for the currently projected video signal. | |
|
| |
INFORMATION |
| |
| LAMP TIME (LOW) | 0 H |
|
| |
| INPUT | COMPUTER2 |
| RESOLUTION | 1024x768 |
| VERTICAL | 75.04 Hz |
| FREQUENCY | |
|
| |
| HORIZONTAL | 60.02 KHz |
| FREQUENCY | |
|
| |
R G | B |
|
H V | SYNC. TYPE | 5wire |
