Mitsubishi Electronics FD730U Menu operation, EN-19, Quick Menu, QUICK MENU Basic operation

Menu operation

As one of the two types of MENU display, following QUICK MENU appears on the screen when pressing MENU button on the remote control. In addition, DETAIL MENU (See page 21) appears when selecting DETAIL MENU in this MENU and pressing ENTER button.

•Comparing QUICK MENU with DETAIL MENU, if the contents in those two menus are same each other, the functions in those two menus are same as well.

•To close QUICK MENU or DETAIL MENU, press MENU button when MENU is displayed.

QUICK MENU

* Menus are not displayed when no signal is supplied to the projector.

QUICK MENU

COLOR ENHANCER	AUTO
	PRESENTATION
	STANDARD
	THEATER
	USER
CONTRAST	±30
BRIGHTNESS	±30
COLOR TEMP.	STANDARD
	LOW
	HIGH
	USER

INFORMATION

SHARPNESS *1

LAMP MODE

ASPECT

USER MENU

SELECT USER MENU

DETAIL MENU

LAMP TIME (LOW)

INPUT

RESOLUTION

VERTICAL FREQUENCY

HORIZONTAL FREQUENCY

SYNC. TYPE *2

±5

STANDARD, LOW

AUTO, 16:9, NATIVE

COLOR

TINT

CLOSED CAPTION

WALL SCREEN

STANDBY MODE

AUDIO INPUT

IMAGE REVERSE

MENU POSITION

CINEMA MODE

LANGUAGE

OK

*1 Not available with certain signals

*2 Not available when the input signal is from the VIDEO IN or S-VIDEO IN terminal.

QUICK MENU Basic operation

Several settings can be adjusted using the menu. Example : Contrast setting

1.	Press the MENU button.
	QUICK MENU
2.	Press the ENTER button (or	button).

QUICK MENU
COLOR	AUTO
ENHANCER

3.Press theorbutton to select CONTRAST.

CONTRAST0

4.Press theorbutton to adjust the contrast.

CONTRAST+10

5.Exit the menu by pressing the MENU button several times.

Important:

•When the button doesn’t function, unplug the power cord from the wall outlet. Wait about 10 minutes, plug the power cord in, and try again.

•After selecting the items marked with , press the ENTER but- ton.

EN-19