Mitsubishi Electronics FD730U-G user manual EN-47, Specifications continued, NATIVE mode

Specifications (continued)

Specification of RGB signals in each computer mode of the projector (continued)

Important:

•Some computers aren’t compatible with the projector.

•The projector’s maximum resolution is 1920 x 1080 pixels. It may not display images of higher resolutions than 1920 x 1080 cor- rectly.

•Images with SYNC on G (Green) signal may jitter.

•Images with SYNC on G (Green) signal may be tinged with green.

•If the resolution and frequency of your computer aren’t shown on the table, find the compatible resolution and frequency by chang- ing the resolution of your computer.

•TV60 and TV50 are equivalent to 480i and 576i respectively. When these signals are supplied to the VIDEO IN or S-VIDEO IN terminal, the signal mode is indicated as TV60 or TV50. When they are supplied to the COMPUTER/COMPONENT VIDEO IN terminals, the signal mode is indicated as 480i or 576i.

•This projector doesn’t support 480p signals from video devices having 4 lines (R, G, B, CS*) or having 5 lines (R, G, B, H, V).

* : Composite Sync

•When a certain signal such as SXGA85, SXGA85b and UXGA60 is input, the number of displayed colors may decrease depending on the setting of ASPECT in the FEATURE menu. Change the sig- nal format of the computer, if necessary.

NATIVE mode

When moire patterns or lines of uneven thickness appear on the pro- jected image, these symptoms may be improved by displaying it in its original image size (NATIVE mode). To display the image in the NATIVE mode, set ASPECT of the FEATURE menu to NATIVE. (See page 22 for menu setting.)

•In the NATIVE mode, you cannot change the magnification factor and magnification range.

•Images of which resolution is larger than the panel resolution can- not be displayed in the NATIVE mode.

•In the NATIVE mode, images are black-framed when the image res- olution is lower than the panel resolution.

EN-47