Network settings (continued)
How to Use Network Function
•When connecting a computer and projector with LAN, config- ure the both IP Addresses in the same network group.
If connecting in different network group, be sure to use a router. As for the settings of a router, ask the network adminis- trator.
•Configure the IP CONFIG correctly. If the settings are not cor- rect, the communication may be unavailable. For the detail, consult the network administrator.
•Depending on the settings of standby mode of the projector, LAN function may be unavailable. See page 23 for the detail of standby mode.
Glossary
For more detail of the glossary below, refer to the technical book that is commercially available.
Term | Description | |
|
| |
| Abbreviation for Dynamic Host Configuration | |
DHCP | Protocol. This protocol automatically assigns IP | |
| Address to networked devices. | |
|
| |
IP Address | Numerical address to identify networked comput- | |
ers. | ||
| ||
|
| |
| A numeric value to define the number of bits | |
Subnet Mask | used for a network address of a divided network | |
| (or subnet) in an IP Address. | |
|
| |
Default Gate- | A server (or router) to communicate across net- | |
works (subnets) that are divided by Subnet | ||
way | ||
Mask. | ||
| ||
|
| |
| Abbreviation for Media Access Control Address. | |
| MAC Address is a unique ID number assigned to | |
MAC Address | each network adapter. And this is based on | |
| which data are sent and received between net- | |
| work adapters. | |
|
|
