Mitsubishi Electronics FD730U-G Advanced features continued, EN-34, Freeze, Password function

Advanced features (continued)

•When you display 60-Hz and 50-Hz video signals at the same time, motion images may not be displayed properly. In this case, set VERT. SYNC of USER in the SIGNAL menu to OFF for the left screen. (See page 25.)

•When BACK COLOR of the INSTALLATION menu is set to IMAGE, you cannot use the split mode.

To change the input source of the left or right screen:

•	To change the input source of the left screen, press the	button
	on the remote control.
•	To change the input source of the right screen, press the	button
	on the remote control.

Freeze

To stop the motion in the image temporarily (or to dis- play a still image):

Press the FREEZE button on the remote control.

•The image freezes temporarily.

To resume the motion in the image:

Press the FREEZE button on the remote control again.

Important:

•Do not keep displaying a still picture for an extended period of time, as the afterimages may linger on the screen.

Password function

This projector provides the passwordfunction that is intended to pre- vent wrong operations by children and set controlled access for speci- fied users.

DISPLAY INPUT............ When the projector is turned on, the star-

tup screen (or splash screen) appears and stays on the screen until the password is entered. When the password is entered, the startup screen switches to the regular operation screen.

MENU ACCESS............ All the buttons except for the POWER but-

ton on the projector are disabled. (The buttons on the remote control are enabled.) You can use this mode to pre- vent wrong operations by children and set controlled access for specified users.

SPLASH ID SCREEN ... IMAGE CAPTURE and SPLASH SCREEN in the menu become unselect- able. SPLASH SCREEN is set to ON automatically.

To enable the password function:

1.Display the FEATURE menu.

2.Press the or button to select PASSWORD FUNCTION.

3. Press the	or button to change the mode among DISPLAY
INPUT	, MENU ACCESS	.

	• When the password has already been set, the mode never
	changes. Press the ENTER button to cancel the password
	function and try again.
4.	Press the ENTER button.
	• The screen for setting the password function appears.
	opt.
	FEATURE
	MENU ACCESS
	LOCK	OK
	UNLOCK	OK
5.	Press the ENTER button.
	• The screen for entering a password appears.

PASSWORD

CONFIRM

1

4	2	O K : ENTER	CANCEL : MENU
	3

6. Enter a 4 - 8 digit password using the , , or buttons on the remote control as shown below.

( =1, =2, =3, =4)

7.Press the ENTER button.

•To cancel the procedure, press the MENU button.

8.Enter the password again for confirmation using the same steps.

9.Press the ENTER button.

•If the entered passwords are incorrect, an error message appears.

•To cancel the procedure, press the MENU button.

To cancel the password function:

1.	Display the FEATURE menu.
2.	Press the	or	button to select PASSWORD FUNCTION.
3.	Press the ENTER button.
	• The screen for canceling the password function appears.
	opt.
	FEATURE
	MENU ACCESS
	LOCK		OK
	UNLOCK		OK
4.	Press the ENTER button.
	• The screen for entering the password appears.

PASSWORD

1

4	2	O K : ENTER	CANCEL : MENU
	3

5. Enter a 4 - 8 digit password using the , , or buttons on the remote control as shown below.

( =1, =2, =3, =4)

6.Press the ENTER button.

•If you enter a wrong password, an error message appears.

•To cancel the procedure, press the MENU button.

Important:

•When the screen for entering the password is displayed, to disable the password function, hold down the MENU and ENTER buttons on the control panel together.

Magnify

By pressing the MAGNIFY button on the remote control, you can mag- nify the image to view the details.

•The MAGNIFY mode doesn't function with some input signals. For details, see page 46.

•The MAGNIFY mode doesn't work with video or S-video signal.

MAGNIFY

Magnified image

To use the MAGNIFY mode:

1.Press the MAGNIFY button.

• You can select the area to be magnified by pressing the , , or button on the remote control.

•You can change the magnification of the selected area by pressing the VOLUMEorbutton.

2.Press the MAGNIFY button again to exit the MAGNIFY mode.

•The regular operation screen will appear.

Important:

•In the MAGNIFY mode, you can't adjust the volume.

EN-34