Mitsubishi Electronics FX1S manual Rst

Devices in Detail 4

FX Series Programmable Controllers

4.11.41 Phase Counters - Assigned Start and Reset (C241 to C245) These counters have one countable input

and 1 reset input each. Counters C244 and
C245 also have a start input.	X13
When the direction flag M8245 is ON, C245			M8245
counts down. When it is OFF C245 will count	X14
up.
		RST		C245
When X14 is ON, C245 resets in the same	X15
manner as normal internal 32bit counters, but
				C245
C245 can also be reset by input X3. This is
				D0
assigned automatically when counter C245 is

used (see previous counter tables).

Counter C245 also has an external start contact, again automatically assigned. This is actually input X7. Once again this data can be found on the previous counter tables.

When X7 is ON, C245 starts counting, conversely when X7 is OFF C245 stops counting. The input X15 selects and reserves the assigned inputs for the selected counter, i.e. in this case C245.

The reason why these counters use assigned start (X7) and reset (X3) inputs is because they are not affected by the cycle (scan) time of the program. This means their operation is immediate and direct.

In this example C245 actual counts the number of OFF to ON events of input X2.

Note: Because C245 is a 32bit counter, its setting data, specified here by a data register also has to be of a 32bit format. This means that data registers D1 and D0 are used as a pair to provide the 32bit data format required.

Device specification:

• All of these counters are 32bit up/down ring counters. Their counting and contact operations are the same as normal 32bit up/down counters described on page 4-21. When the counters current value reaches its maximum or setting value, the counters associated contacts are set and held when the counter is counting upwards. However, when the counter is counting downwards the contacts are reset.

Setting range:

• -2,147,483,648 to +2,147,483,647

Direction setting:

•The counting direction for 1 phase counters is dependent on their corresponding flag M8✰✰✰; where ✰✰✰ is the number of the corresponding counter, (C241 to C245).

-When M8✰✰✰ is ON the counter counts down.

-When M8✰✰✰ is OFF the counter counts up.

4-27