Mitsubishi Electronics HS-S8300E(BRS) Features and Functions, Front View, Fluorescent display

FEATURES AND FUNCTIONS

FRONT VIEW

2	1	3	4 5	6
	POWER		REC	JOG/ADJUST	SHUTTLE
			CLEAR/		ENTER/
			REW		FF
	EJECT		STOP
	S-VHS	PICTURE	COUNTER MEMORY/ PLAY
	OFF ON	DISPLAY
			SKIP/INDEX

SOFT SHARP	POSITION/			REC/PLAY		PAUSE/
	TRACKING VERTICAL		COUNTER	MODE	TIMER REC	SHUTTLE HOLD
	ADJUST		RESET
I			D		A
J HGF		Fluorescent display	E CB 98				7

1POWER button (Press for on; press again for off) The POWER indicator illuminates when the VCR is switched on.

2EJECT button

Press to remove the cassette.

3Cassette loading slot

Cassette tape is inserted in this slot for loading.

4STOP button

Press to discontinue all tape related functions.

5REC (RECORD) button Press to begin recording.

6JOG dial

Use to forward the tape frame-by-frame and to set the menus.

7SHUTTLE ring

Use to adjust the playback speed or to set the menus. Turn this ring to the right to forward a tape or to forward search. Turn this ring to the left to rewind a tape or to reverse search. Also use to clear the alarm list, power loss list and timer recording and to initialize the menu settings.

8PLAY button

Press to playback a previously recorded tape.

9PAUSE/SHUTTLE HOLD button

When pressed during recording, tape movement stops temporarily. Press again to continue the recording. When pressed during playback, tape movement stops and a still field is displayed. Press again to restore normal playback. Pressing and holding this button after turning the SHUTTLE ring allows continuous high speed playback even if the SHUTTLE ring is released.

ACOUNTER MEMORY/SKIP/INDEX button

Use to switch between COUNTER MEMORY (P.19), SKIP SEARCH or INDEX SEARCH (P.24).

BTIMER REC button

This button is pressed when a timer recording is to be made.

CREC/PLAY MODE buttons

Set to 3H, L12H, L24H, 48H - 960H or 0H mode to select recording speed. Set to 3H, L12H, 12H, L24H, 24H, 48H - 960H or 0H mode to select playback speed during playback recorded in SP mode.

DCOUNTER RESET button

Press to reset the counter to “00000”.

EDISPLAY button

Press to display the MAIN MENU.

Press again to show the present time display.

FPOSITION/VERTICAL ADJUST buttons

•When (+) button is pressed, the day and present time display will move to the right. When the (-) button is pressed, the day and present time will move down the screen. Cannot be adjusted if a warning is displayed.

•Press these buttons to adjust for vertical vibrations when in still mode or during fast playback. Refer to pages 7 and 27 for more details.

GTRACKING buttons (+/-)

Press these buttons if noise is present during playback, reverse playback or slow playback.

HPICTURE control

The picture quality can be adjusted between soft and sharp.

ILOCK button

When pressed with a ball-point pen or a pencil, the unit will be locked into the current mode and the operation buttons will not operate. Release the lock by pressing the lock button again.

JS-VHS switch

Used to select ON/OFF S-VHS mode while recording. ON : Resumes S-VHS mode recording when using S-

VHS cassette.

OFF : Recording takes place in VHS mode with both VHS and S-VHS cassette.

4