FEATURES AND FUNCTIONS
REAR VIEW
1 | 2 4 6 9 A | ||||
| 3 5 7 8 | ||||
|
|
|
|
|
|
SET RST REC GND ALM MODE |
| CLK CALL | |||||
| IN |
|
|
| OUT |
| RESET |
|
|
|
| ||||
|
|
|
|
|
|
| |
IN OUT
É MIC | IN | OUT |
| REMOTE |
| AUDIO | IN | OUT |
|
|
|
| VIDEO |
|
KJ I H G | F ED | |||
B
IN
OUT
C |
N
•Ensure the power cord is not plugged into the mains outlet before connecting to any rear terminals.
1AC power socket
This socket connects to the power cord. Insert the cord firmly.
2SET IN terminal
Input terminal for alarm recording. The alarm sensor is connected here.
3RST (RESET) IN terminal
Input terminal to stop alarm recording when “ALARM REC DURATION” of the “RECORDING SET UP” menu is set to “MAN1”. The alarm reset switch is connected here. This terminal can also be used to set the
4REC IN terminal
Input terminal to start/stop recording. Also, use this terminal for series recording (P.17) or synchronous recording (P.18).
5GND (GROUND) terminal
When a lead connected to other terminals requires a ground, connect the ground lead here.
6ALM (ALARM) OUT terminal
Output terminal to indicate alarm recording to an external alarm.
7MODE OUT terminal
Output terminal to indicate the VCR’s mode of operation. Selected by setting “MODE OUT” on the “REAR TERMINAL” menu.
8CLK (CLOCK) OUT terminal
Output terminal to control an external camera switcher.
9CALL OUT terminal
Output terminal to indicate when tape has finished recording or if there has been a problem during recording.
ARESET button
When pressed, the present time, alarm recording list, power loss list and the number of tape use will be erased. While the button is pressed, the power is cut off from the VCR. If there is a cassette tape in the VCR and the button is released, the power indicator will light and the tape will fast forward for a few seconds. The VCR will then switch off.
B
Input terminal to connect with a personal computer via
C
Output terminal to connect the VCR with other VCRs via
D
Output connector for video signal.
E
Input connector for video signal.
FREMOTE jack
Remote control is possible by connecting the optional remote control unit
GVIDEO OUT connector
Output connector for video signal (BNC connector). If the power switch is turned OFF, the signal from the VIDEO IN connector is looped out to this connector.
HVIDEO IN connector
Input connector for video signal (BNC connector).
IAUDIO OUT connector
Audio output connector (RCA pin).
JAUDIO IN connector
Audio input connector (RCA pin).
KMIC IN jack
Input jack for a microphone with 600 ohms impedance.
6
