Mitsubishi Electronics LT-37131 Back and Side Panels, Back Panel Side Panel, INPUT 1 and 2 Inputs

18Chapter 1. Television Overview

Back and Side Panels

Back Panel 1

Side

Panel

	Back Panel	2
1. ANT 1/MAIN, ANT 2/AUX (Antenna)	2.	INPUT 1 and 2 Inputs

If you are connecting an antenna, direct cable without a cable box, or are using cable with a CableCARD™, connect the main antenna or cable source to

ANT 1/MAIN.

ANT 1/MAIN and ANT 2/AUX can each receive both digital and analog over-the-air channels from a VHF/UHF antenna or non-scrambled digital/analog cable source.

ANT 1/MAIN and CableCARD™

(Audio and Video)

INPUT 1 and 2 can be used to connect a VCR, Super VHS (S-VHS) VCR, DVD player, standard satellite receiver, or other A/V device to the TV. INPUT 3 is a third set

of jacks located in the front of the TV for convenience. Please note that if S-VIDEOand VIDEO are both avail- able, you must choose to connect only one.

3. COMPONENT 1 and 2 Inputs

Use ANT 1/MAIN to receive premium subscription cable TV service authorized by the CableCARD™ access card. The CableCARD access card is provided by your local cable company. ANT 2/AUX can continue to receive over-the-air or non-scrambled cable signals when ANT 1 is used for CableCARD™ service.

(Audio and Video)

Y Pb Pr (480i/480p/720p/1080i)

Use these jacks to connect devices with component video outputs, such as DVD players, external HDTV receivers, or compatible video game systems. Please see Appendix B for signal compatibility.