Mitsubishi Electronics LT-37131 manual Using IEEE 1394 Devices, Enter

88Chapter 7. Using IEEE 1394 Devices

Switching Between Analog and Digital IEEE 1394 Outputs for the Same Device

To enable switching between analog and digital outputs for the same device, you must have check-marked the Analog Connection box when the New 1394 Device screen displayed when you first connected the device. See the section “Before You Begin” in chapter 2, “TV Connections.”

Figure 5. The ClearThought Auto Input sensing screen for IEEE 1394 devices. Place a check in the Analog Connection box if your device has both analog and digital outputs.

1.Press INPUT to display the Input Selection menu.

2.Highlight the icon for the IEEE 1394 device and press

ENTER.

3.Press to switch between icons representing the analog and digital outputs of the device. See figure 6.

Figure 6. The Input Selection menu shows icons for the analog and digital outputs of the IEEE 1394 device.

4. Press ENTER to select the device output.