38Chapter 3. TV Operation

Choosing a Program Source

NOTE: If your only viewing sources are connected to the ANT 1 and ANT 2 antenna jacks, you can switch inputs without the Input Selection menu. Press INPUT to switch between ANT 1 and ANT 2. To verify which is the current source while watching TV, press INFO to see the on-screen status display.

Selecting from Multiple Sources: The Input Selection Menu

The Input Selection menu allows you to select an input to watch on the TV. The current input appears as a gold- colored icon.

1.Press INPUT on the TV’s remote control to display the Input Selection menu (Figure 2).

2.To select a different input, press on the TV’s remote control to move the highlight through icons in the input section.

3.Press ENTER to switch to the device and close the menu.

More About the Input Selection Menu

To assign meaningful labels to the icons, such as “VCR” or “DVD,” see the “Input Name” section of chapter 4, “TV Menu Settings.”

To rearrange the icons, see the “Icon Order” section of chapter 4, “TV Menu Settings.”

To use with IEEE 1394 devices, see additional informa- tion in chapter 7, “Using IEEE 1394 Devices.”

Input Section

Figure 2. Input Selection menu

IMPORTANT

To receive ChannelView updates: Set the Energy Mode to Fast Power On and leave the TV powered off for a while each day. If the TV loses power, program listings will be lost until the next update.

ChannelView™ Channel Listings

ChannelView provides program information only when pro- vided by the broadcaster for memorized digital channels on ANT 1 or ANT 2. Digital channels are indicated with a “D” and analog channels with an “A.”

Digital channels are shown with the major channel and sub-channels (or bitstreams). Analog channel names are shown only if they are named in the channel menu.

Note: If limited data is shown or no program data ap- pears, it is because the broadcaster is not sending the information. This is not a defect of your TV.

Using ChannelView

 

Feature

Instructions

 

 

 

 

 

 

 

 

 

View listings while viewing

Press

GUIDE.

 

 

 

ANT 1 or ANT 2.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Scan through memorized

Press

or .

 

channels one by one.

 

 

 

 

 

 

 

 

 

 

 

 

Scan quickly through memo-

Press

PAGE

/ .

 

 

rized channels.

 

 

 

 

 

 

 

 

 

 

 

 

 

View future program informa-

Press

or

to highlight

 

tion for digital channels.

a channel and press .

 

 

 

 

 

 

 

Return to viewing basic list-

Press .

 

 

 

ings information

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 3. ChannelView screen, current programs. Use to exchange displays for current and future programs.

Figure 4. ChannelView screen, future programs on the selected channel (digital channels only)

Page 38
Image 38
Mitsubishi Electronics LT-37131 manual Choosing a Program Source, ChannelView Channel Listings, Using ChannelView