Mitsubishi Electronics LT-37131 Audio/Video Menu, A/V Memory Reset, Settings Audio and Video

Chapter 4. TV Menu Settings 59

Audio/Video Menu

Figure 13. Audio/Video Menu

A/V Memory Reset

A/V Memory Reset allows you to reset a specific input’s A/V settings to the original factory settings. Highlight the

box and press to select the input name. Next press

ENTER.

The audio settings of Balance, Listen to, and Language are general TV settings unaffected by A/V Memory Reset.

To reset all A/V settings at once, including the three general settings, perform an A/V Reset by pressing the front-panel buttons GUIDE and FORMAT simultaneously.

Settings (Audio and Video)

Each input or device has its own A/V memory. Press to select the input or device in the A/V Memory Reset box, then select Audio or Video to adjust individual settings. Press ENTER to close the menu and display the individual settings.

Use	to cycle through the individual settings. Use
	to change the setting values. Press EXIT to return to

normal TV viewing. For descriptions of the individual A/V settings, see the following pages.

Video Mute

The default is On, which displays a blue background when no signal is being received on the INPUT, COMPO- NENT, or HDMI jacks.

Film Mode (480i signals only)

Auto is the default setting. With Auto selected, the TV automatically detects and applies film-decoding correc- tion for images that originated on 24-frame-per-second film cameras and were converted to 30-frame-per-second video for broadcast (3:2 pulldown conversion). Try the Off setting if the TV adds noticeable jagged edges to the images.

When the original video was filmed on 30-frame-per- second cameras, the Auto setting automatically applies video decoding, the same as used with the Off setting.

Film Mode is not effective for high-definition signals.

TV Speakers

This selection turns the TV’s internal speakers on or off. Select Off when sending the sound through a separate stereo system or surround sound A/V receiver.

Note: To prevent damage from a sudden increase in vol- ume, turn the TV volume down low before chang- ing this option to On.

Audio/Video Settings and the Remote Control

To adjust individual audio or video settings directly with the remote control:

1.Press AUDIO or VIDEO repeatedly to cycle through the available settings.

2.Press to adjust the setting. The setting display will disappear after five seconds of inactivity.