Chapter 2. TV Connections

27

Wall Outlet Cable (no cable box)

(can be used with a CableCARD™)

It is very important to connect the incoming cable for your primary viewing source to ANT 1/MAIN, especially for CableCARD™ use.

1.Connect the primary incoming coaxial lead cable to ANT 1/MAIN on the TV back panel.

2.For an optional secondary antenna source, connect an antenna (or cable) to ANT 2/AUX.

3.If you have subscribed to a CableCARD™ service, Insert the CableCARD into the CableCARD slot. The top of the card must face in the direction indicated by the CARD TOP arrow.

See chapter 1, “Television Overview,” for additional

CableCARD information.

���������������

��� ������������������� ����������������

���������������

�����������������������

�������������������

����������

�����������������

 

��������������

 

������������

��� ������������

����

�������������

Figure 6. Wall Outlet Cable

Note: ANT 1 is located behind ANT2 when you are facing the back of the TV.

Page 27
Image 27
Mitsubishi Electronics LT-37131 manual Wall Outlet Cable no cable box, Can be used with a CableCARD