![](/images/new-backgrounds/1311558/31155833x1.webp)
MODELS:
ELECTRICAL ADJUSTMENTS
Note: Perform only the adjustments required.
Do not attempt an alignment if proper equipment is not available.
1.Test Equipment
•Oscilloscope (Unless otherwise specified, use 10:1 probes)
•Signal Generator
•Frequency Counter
•Direct Current Voltmeter Direct Current Power Supply
•Multiplex Audio Signal Generator
•Direct Current Ampere Meter
2.Test Signal
A. Monoscope Signal
Note: If you do not have
a monoscope signal source, connect the unit to a VCR and play a Monoscope *alignment tape.
(* Part Number: 859C568060)
B. Color Bar Signal
Use the color bar signal shown below, unless otherwise specified in this manual.
Monoscope Signal
100%
75%
40%
40%
1H
Page 17