Monarch 9864 Loading fan-foldedmaterial

06/08 Rev. AA	QUICK REFERENCE
	9864

1.Set the outer disk of the material unwinder to the material width.

2.Pull the material through the inlet opening (1) to the material guide printing side up.

3.See “Loading material” to continue.

[1]Pull the fan-folded material through the inlet opening in the rear side and see “Loading material” to continue.

Contents

Page WARNING CANADIAN D.O.C. WARNING Trademarks Using the Printer Connecting the printer Page Using the operator panel Remote operator panel Loading material Dispensing model only: Page Loading fan-foldedmaterial Changing material 9864 dispenser Loading a ribbon Settings for all printers Ribbon tension Material parameters Creating a print job Sending a print job CF card Starting to print Settings for the material type Printing the status report Density Safety Troubleshooting Notes on cleaning Cleaning the Printhead Page Cleaning the Rollers Cleaning the print roller Cleaning the feed roller Cleaning the dispenser-feedroller Cleaning the Sensors Cleaning the gap photoelectric switch/sensor Cleaning the material end photoelectric switch/sensor Specifications Printer - 4-inch Printer - 5-inch Printer - 6-inch Printer - 8-inch Printer Operation Supplies (Material) Ribbon (Foil)