Monarch 9864 Cleaning the Rollers, Cleaning the print roller, Dispenser version only:

06/08 Rev. AA	QUICK REFERENCE
	9864

Clean the print roller when you see adhesive buildup or dirt on the roller.

1.Turn off the printer and disconnect the power supply.

2.Remove the material and ribbon.

3.Dispenser version only: Remove the dispensing edge to access the print roller by removing both holding screws (1).

Fig. 2 When using a 64xx dispenser, remove the dispensing edge to access the print roller.

4.Unscrew the two thumb screws

on the printhead mounting and rotate the entire printhead mounting upwards.

PSee “Cleaning the Printhead” for more information.

If the printhead needs to be removed, mark the position of the printhead on the axle, if it is not flushed against the inner or outer plastic ring.

5.Moisten a cloth with isopropyl alcohol and wipe the roller clean. Turn the print roller with your finger to clean the entire surface.

Fig. 3 Rotate the printhead upwards before cleaning it.