9

06/08 Rev. AA

QUICK REFERENCE

 

9864

Changing material

Follow these instructions to replace the material roll.

The printer must be turned on; otherwise, the printhead presses on the material.

9864

1.Set the printer to offline mode and open the cover.

2.To remove the material, press and hold the opener while pulling the material back towards the roll (Fig. 2).

9864 dispenser

1.Set the printer to offline mode and open the cover.

2.Tear the backing paper off (2), pull out the clip (Fig. 3) and remove the wound up backing paper (Fig. 4).

3.Open the shutter (3) and pull out the remaining backing paper towards the dispensing edge.

4.To remove the material, press and hold the opener while pulling the material back towards the roll (Fig. 2).

You can also move the material

backwards by pressing the Online+Cut keys while in offline mode.

1

2

3



‘