Monarch 9864 Material parameters, Function, Parameter

12

06/08 Rev. AA	QUICK REFERENCE
	9864

Material parameters

The following three parameters are used to set the material properties:

Parameter	Function
PRINT PARAMETER > material type	Sets the material type (punched or
	continuous)
PRINT PARAMETER > material length	Sets the material length
PRINT PARAMETER > material width	Sets the material width
SYSTEM PARAMETER > light sens. type	Sets the sensor type (reflex or
	transmission) based on the material
	(marks or perforations)

[Tab. 1] Important parameters for setting material properties

PFor more information on setting parameters, see “Operating the parameter menu” in the topic section “Info printouts and parameters.”