18

06/08 Rev. AA

QUICK REFERENCE

 

9864

The printhead does not need to be removed. Mark the position of the printhead on the axle, if it is not flushed against the inner or outer plastic ring.

4.Moisten a lint-free cloth with isopropyl alcohol and wipe the printhead clean. You can also use a cleaning pen (114226).

Fig. 1 Cleaning the printhead – the printhead does not need to be removed (Fig: Dispenser version).

5. Return the printhead mounting to its original position and tighten the thumb screws.

Press the thumb screw on the tapered edge of the square axle to ensure the exact positioning of the printhead mounting on the axle. Also pay attention to the position of the printhead in relation to the edge of the label.

The printhead should be flush against the inner black plastic plug.

6. Connect the printhead cable before turning on the printer.