7
06/08 Rev. AA | QUICK REFERENCE |
| 9864 |
14.Guide the backing paper around the feed roller (1) and guide pins (2) of the drawing module to form an S shape (Fig. 1).
15.Replace the drawing module (Fig. 2).
When replacing, the locking lever must point to the right (half a revolution open). Do not lock it until the drawing
module has been pushed in all the way!
16.Wrap the end of the backing paper clockwise around the takeup reel (3) and secure it with the clip (4) (Figs. 3 and 4).
17.Position the block bearing and the pressure roller (5) in the middle of the backing paper.
This keeps the backing paper in place around the dispensing edge!
18. Lock the locking lever (Fig. 4).
1
2
3
4