1

06/08 Rev. AA

QUICK REFERENCE

Getting Started

 

9864

 

Using the Printer

This Quick Reference contains supply loading and general care and maintenance procedures. For more detailed information, refer to the Operator’s Handbook on the CD-Rom included with your printer.

Review the safety information in the Regulatory Compliance document on the

CD-Rom before you begin.

Connecting the printer

WARNING!

Touching live electrical parts causes exposure to hazardous electrical currents and may lead to burns.

Turn off the printer before connecting the power cable.

Only operate the printer using the system voltage indicated on the nameplate.

Only connect the printer to a grounded power socket fitted to authorized standards.

Connect the power cable so that

–no one trips or steps on it

–the power plug can be easily removed if necessary.

1.Turn the printer power switch to “0” (off).

2.Connect the printer to the power supply using the cable provided.

3.Using the data cable supplied, connect the Centronics interface on the printer to the host computer.

AB

[1]Sockets for the Centronics cable (A) and power cable (B) on a 9864.

4.Turn on the printer using the power switch (set to position “1”). You see the following sequence of messages:

System start...

The boot loader is starting.

 

Valid firmware recognized, program starts.

 

System start...

Start user prog