11
06/08 Rev. AA | QUICK REFERENCE |
| ||
| 9864 |
|
|
|
Settings for all printers |
|
| 1 | |
| ||||
|
|
|
| |
Ribbon tension | | |||
The tension of the ribbon unwind reel (1) and ribbon rewind reel (2) can be set using the red plastic hexagons on the ribbon reels. If these are turned clockwise, the tension increases (Fig. 1: dispenser version).
Default settings
The default settings covers a wide range of ribbon widths, but you may need to adjust the settings for very narrow or very wide ribbons.
Setting
During feeding, the ribbon must run evenly (no creases) for the entire length between the reels. Use the following guidelines:
If the ribbon is loose, creased, or is loosely wound on the rewind reel.
Increase the unwind/rewind tension (Turn the red hex nut clockwise).
If the ribbon visibly stretches or tears during printing. The ribbon is not loaded correctly.
Decrease the unwind/rewind tension (Turn the red hex nut