Monessen Hearth Glass replacement, SS38 Direct Vent Gas Stove, Always use gloves when handling

SS38 Direct Vent Gas Stove Glass replacement

CAUTION	Always use gloves when handling
	broken glass.

1.Put on gloves. Remove door from hinges by lifting the door up. Figure 48

2.Remove the 7/8" rope from around glass frame. Figure 49

3.Using a 5/16" socket, remove hex nuts from glass retain- ing brackets. Remove retaining brackets. Figure 49

4.Carefully remove broken glass.

5.Wrap new glass pane(s) with 3/4" gasket. Make sure you have 1/4" overlap on each side.

6.Place new glass in frame. For three-piece glass style frame, slide new glass into the 45° aluminum post (not shown).

7.Fasten retaining brackets back into place with 5/16" nuts.

8.Replace 7/8" rope. Make sure the joint is at the bottom and there is no gap.

9.Slide door back down the hinges. Figure 48

Preformed

Glass

ST1117

Gasket

Retaining

Bracket

Figure 49 -

Replace Formed Glass

WARNING	Make sure the glass panel edges do not
	touch any metal parts during thermal
	expansion.
	Door

Hinges

Figure 48 -

Remove Door from Hinges

ST1116

Retaining

Brackets

Hex Nuts

(not all shown)

Rope

Gasket

NOTE: Use only original MHSC replacement parts.

32 46D0232