Motorola 9500 manual + Unblock the PIN2 Code, + Change the Security Code

+Unblock the PIN2 Code

If your old PIN2 number is entered incorrectly three times in a row, Blocked appears in the display. You needs to enter a PIN unblocking key (PUK), which you can obtain from your service provider.

1.Press *, *, 0, 5, 2, *.

2.Enter unblocking key. Enter the 8-digit

unblocking code, and then press O. Your service provider supplies this code.

3.Enter a new PIN2 code, and then press O.

4.Re-enter the new PIN2 code, and then press O.

You cannot unblock the PIN2 code from cellular mode.

+Change the Security Code

The security code is your phone’s primary security number. You use it to reset your phone to its default settings and prevent access to your phone book. It is originally set to 000000.

1.Follow the steps in the “1-2: Getting to

Phone Setup...” to get to New Security Code, and then press O to select. You will

see Enter Security Code.

2.Enter the current security code, and then

press O. You will see Enter New Security Code.

3.Enter a new security code, and then press

O. You will see Secur. Code and the six- digit number selected.

4.Press and hold Cto exit the menu.

You cannot change this feature in cellular mode. You must change this feature from satellite mode. However, the changes to this feature will apply in cellular mode.

Satellite Mode

Cellular

Mode

Satellite Mode

Cellular

Mode

Customizing Phone Features 145