Flash Options

rSending a Flash

Satellite Mode

Cellular

Mode

(CDMA/

AMPS)

Cellular

Mode

(GSM)

This feature only applies to CDMA/AMPS cellular users.

Many CDMA/AMPS network features (for example, Call Waiting, Call Holding, Call Forwarding) require you to send a “flash” over the air during a call to access them. This is similar to when you press the switch hook on your conventional phone in your home or office to switch between calls. The flash alerts the network that you want to use a particular network feature. Your service provider will provide you with the appropriate codes to send with the flash for the features to which you have subscribed.

To send a phone flash:

1.Press Mwhile you are in a call. You will see

followed by Select?

2.Press O. You will see Send Flash?

3.Enter the access code for the feature you

want to access, if necessary, and then press Oto send the flash.

or

Press Cto cancel the flash.

This feature only applies to CDMA/AMPS cellular users.

62Using In-Call Features

Page 66
Image 66
Motorola 9500 manual Sending a Flash, Gsm