Motorola 9500 manual Placing a Call on Hold, If you want to Then, Dial the number as usual

Placing a Call on Hold

Satellite Mode

You must subscribe to this network feature through your service provider(s).

Note: This feature behaves differently based on the mode you are in. Check your mode settings before using this feature. See “Selecting a Mode” on page 169.

You can place a call on hold to receive a new call or while making a new call. You can only place one call on hold at a time, so some options may not be accessible if you have already placed a call on hold.

To place a call on hold:

1.Press Muntil you will see Call Hold.

2.Press O. Your current call is put on hold and

you will see Call Holding followed by

Reconnect?.

Once you a call is on hold, you have these options:

If you want to...	Then...
	1. Press Muntil you will see
	Make New Call, and then
Make a new call	press Oto select.
	2. Dial the number as usual, and
	then press Oto place the
	call.
	When you are connected to either
	number, you will see 2 Calls
Switch Between	followed by Switch?.
Calls	Press Oto switch to the other call
	and automatically place the current
	call on hold.
	Close the flip cover.
	or
End Both Calls	Press Muntil you will see End
	Current & Held Call, and
	then press Oto select.
	Both calls are disconnected, and
	the display returns to standby.

60Using In-Call Features