Motorola 9500 manual Powering Up the Phone, Turn the Power On and Off, Power-On Messages

Powering Up the Phone

Turn the Power On and Off

To turn your phone’s power on:

1.Insert your SIM card. (See “Insert the SIM Card” on page 28.)

2.Open the keypad cover to expose the keypad.

3.Press and hold Sto turn the phone on and off.

When you turn your phone’s power on, it performs a self test to let you know it’s operational. You may see a number of other power-on messages (see below).

When the mindicator disappears and the n appears, you are ready to start calling.

Power-On Messages

Once your phone is powered on, you may see:

Message	Description
	The phone is attempting to establish
	communications with the satellite or
Searching...	cellular network (depending on your
	mode). See “Accessing the Network”
	on page 159 for more information.
Rotate	You also hear a tone when you see
	these messages. Extend the antenna
Antenna
or	upward and make sure you have a
Orient	clear view of the sky to continue
Antenna	registering.
	Your phone is registering with the
	network. When the process is
Registering	complete, you will see Registered.
	See “Accessing the Network” on
	page 159 for more information.
	Your phone was locked after the last
Enter Phone	use. Enter your four-digit unlock code
	and press Oto proceed. See
Unlock Code	“Locking and Unlocking Your Phone”
	on page 140 for more information.

Using Your Phone 43