Motorola 9500 manual Using Call Waiting, If you want to Then Press O, Press C

Using Call Waiting

Satellite Mode

You must subscribe to this network feature through your service provider(s).

Note: This feature behaves differently based your mode. Check your mode settings before using this feature. See “Selecting a Mode” on page 169.

If you have subscribed to Call Waiting, you must first activate it through the Options Menu (see

page 113). After you activate it, you are notified of incoming calls while you are on the line in two ways. When a call comes in, you hear a beep and see the message Call Waiting followed by Answer?.

If you want to...	Then...
	Press O.
accept the waiting call	Your current call is placed on
	hold.
reject the waiting call	Press C.
	1. Press M. You will see
end current call before	End Active Call?
	2. Press O. Your phone
answering the waiting
call	rings and can now be
	answered normally.

You may see one of the following messages during call waiting activities:

Message	Description
Trying	Your phone is attempting to switch
	between the current and held call.
Hold	The attempt to hold a call was
Failed	unsuccessful.
Cannot Hold	A call is already on hold. You can
Second Call	only place one call on hold.
Reconnect	The held call could not be made
Failed	active again.
	Your phone is working on a
Busy	previous command. Wait a short
Try Later	time before repeating the new
	command.

58Using In-Call Features