Motorola 9500 manual System Scan Settings

System Scan Settings
	Your phone first seeks a home type
	system, then a non-home type system.
Standard	• If home system is non-wireline (type
Mode	A), you will see Std A/B.
	• If home system is wireline (type B),
	you will see Std B/A.
	Your phone first seeks a non-home type
	system, then a home type system. (This
Reversed	mode may be useful in fringe areas or
	certain roaming situations.)
Preference
	• If home system is non-wireline (type
Mode
	A), you will see Scan B/A.
	• If home system is wireline (type B),
	you will see Scan A/B.
Home Only	Your phone does not operate outside its
Mode	home system. You see will Home Only.
	You phone operates only within
Scan A Mode	non-wireline (A) systems. You will see
	Scan A.
Scan B Mode	Your phone operates only within wireline
	(B) systems. You will see Scan B.
	Your phone scans for home or
	programmed preferred System ID
	numbers (SIDs) first. This mode requires
Enhanced	entry of the SIDs for the systems in which
	you wish to operate. Contact your cellular
Preferred
	service provider for SID information.
Scanning
	If you have selected two system operation,
Mode
	the phone seeks cellular service
	according to the system type mode
	selected for each phone number.
	You will see Preferred SIDs.
		Cellular
This feature does not apply to GSM cellular mode.
You will not see this menu option in this mode.		Mode
		(GSM)

Customizing Phone Features 157