106 Operation
DCP501 User Guide
19 Press CURSOR up/down (∧
∧∧
∧ ∨
∨∨
∨) or the number buttons on the DCP501 remote control to enter
the desired password, using CURSOR left/right (<
<<
< >
>>
>) to move between digits. When all four
digits have been entered, press right CURSOR right (>) to highlight OK and then press SELECT
to store the password.
To change a password, follow the same steps, highlighting Change Password and
press SELECT. You are required to first enter the old password before changing to a new
one.
To clear the password feature, thereby removing the Rating Level, follow the same
steps, highlighting Clear Password and press SELECT. You will first be required to
enter the current password before clearing.
20 Press down arrow (∨
∨∨
∨) to highlight the TV Aspect option on the DVD SETUP menu.
21 TV ASPECT: Press SELECT to set TV Aspect. This option changes the TV aspect to
widescreen (16:9) or conventional (4:3). The factory setting for aspect ratio is
4X3 Letterbox.
22 Press CURSOR up/down (∧
∧∧
∧ ∨
∨∨
∨) to highlight one of the following:
4X3 Letterbox to watch a ‘letterbox’ movie on a conventional TV
4x3 Pan Scan to watch a ‘letterbox’ movie full screen on a conventional TV
16X9 Widescreen if you have a widescreen TV
23 Press SELECT.
24 Press down arrow (∨
∨∨
∨) to highlight the Subtitles On/Off option on the DVD SETUP
menu.