64 Operation
DCP501 User Guide
* T E S T T O N E
A
DJ US T *
X F R O N T L E F T : 0 d B
C E N T E R : 0 d B
F R O N T R I G H T : 0 d B
S U R R R I G H T : 0 d B
S U R R L E F T : 0 d B
R E T U R N T O M E N U
* T E S T T O N E
A
DJ US T *
X F R O N T L E F T : 0 d B
C E N T E R : 0 d B
F R O N T R I G H T : 0 d B
S U R R R I G H T : 0 d B
S U R R L E F T : 0 d B
R E T U R N T O M E N U
4 Press select or OK. The test tone plays on the front-left speaker and the current setting
flashes. In the example, 0 dB flashes. The DCP501 begins to cycle through a speaker level
test by emitting a tone from each speaker in the following order for 4-seconds:
Speaker Location
LEFT front channel left
CNTR center channel
RIGHT front channel right
R-SUR surround right channel
L-SUR surround left channel
On-screen Display DCP501 Display
The dB icon turns on.
The current setting for the FRONT LEFT speaker flashes for 4-seconds and the test tone
plays. In this example 0 dB flashes.
On-screen Display DCP501 Display
The dB icon turns on
5 Press CURSOR left/right (<
<<
< >
>>
>) to adjust the volume level for the front-left speaker. In the
example in step 6, the level was changed to +3 dB.
L E F T 0
L E F T 0