54 Operation
DCP501 User Guide
* L E F T
/
R
I G H T S E T U P *
X L E F T / R I G H T : L A R G E
D I S T A N C E : 1 0 f t
R E T U R N T O M E N U
* L E F T
/
R
I G H T S E T U P *
L E F T / R I G H T : S M A L L
X D I S T A N C E : 1 0 f t
R E T U R N T O M E N U
21 Press SELECT or OK and the currently selected setting flashes. In this example, LARGE
flashes. The LARGE and SMALL settings determine which speakers receive low frequency
(bass) information. Use the LARGE setting for a speaker that is a traditional full-range
speaker capable of reproducing sounds below 100Hz. Use the SMALL setting for smaller,
frequency-limited satellite speakers that do not reproduce sounds below 100Hz. When the
SMALL setting is used, a subwoofer is required to reproduce low frequency sounds. Note
that LARGE and SMALL refer to the speaker’s ability to reproduce low frequency sounds
and not their physical size. Consult the manufacturer’s manual that accompanied your
speakers for more information.
On-screen Display DCP501 Display
22 Press CURSOR left/right (<
<<
< >
>>
>) to display LARGE or SMALL.
The speaker icon on DCP501 display changes with the LARGE/SMALL setting.
The settings for LEFT/RIGHT SETUP are affected by your setting on the
SUBWOOFER SETUP menu
23 Press SELECT or OK to accept your selection and LARGE or SMALL stops flashing.
24 Press down arrow (∨
∨∨
∨).
On-screen Display DCP501 Display
L
A
R
G E
D I S T
A
NC E