DCP501 User Guide
Specifications
Digital Cable Receiver
Clear analog video Yes
64 and 256-QAM demodulator Yes
Agile OOB tuner Yes
Return Path Both RF and integrated Telco Return capabilities
Standard definition MPEG2 Yes
NTSC video decoder with adaptive digital comb filter Yes
Graphics Enhanced Resolution Bitmapped Graphics (2/4/8 Bit)
A/V Receiver and Amplifier
RMS Output Power 2x100 Watts, 20 Hz to 20 kHz
5x100 Watts, 1 kHz
Dolby
Digital Decoder 6 channels
DTS
Decoder 6 channels
Dolby
Prologic II Processing Yes
Audio effects processor 6 modes
Amplified speaker outputs Yes
Headphone output Yes
Analog volume control, all speakers Yes
Balance control, right/left Yes
Balance control, front/rear Yes
Tone control, front left/right Yes
SPDIF input with Auto Detect Yes
BTSC decoder Yes
AM/FM Tuning Yes
Audio Frequency Response 20 Hz to 20 kHz, +/- 1 dB
Harmonic Distortion < 0.1% THD, 2x100Watts
< 0.9% THD, 5x100Watts
Audio Signal-to-Noise Ratio 95 dB, A-weighted
Video Signal-to-Noise Ratio > 57 dB (Digital), >49dB (Analog)
Video Frequency Response ± 1 dB from 100 kHz to 4.2 MHz