Motorola DCP 501 Rear Panel

12 Overview
DCP501 User Guide
Item Indicator/Icon Description
36
L, C, and R indicated left, center and right front speakers, respectively. LS and
RS indicate left and right surround speakers, respectively. LFE (Low Frequency
Effect) indicates the subwoofer.
These icons turn on as follows:
 Each icon turns on to indicate a valid input channel. The LFE icon turns on
to indicate a LFE component is present.
 A box around an icon indicates that the output channel for that speaker has
been set.
 The three-dimensional box behind the boxed icon indicates whether the
speaker has been set up as LARGE (the three-dimensional box is turned
on, as shown in the example above) or SMALL (the three-dimensional box
is not turned on).
For more information on speaker settings, see Initial Set-up Operations in the
“Operations” section.
37 On indicates Night mode enabled. In Night mode, you can set the DCP501 to
dim the display illumination and compresses the audio level to lower volume
peaks.
Rear Panel
Figure 5 illustrates the rear panel of the DCP501:
Figure 5
DCP501 rear panel
MODE L NO.: DCP 501
À
LA PLUIE NI À L’HUM IDITE”.
12345678 9 1011
12 13 14 15 16
Refer to the “Installation” section for instructions on installing and cabling the DCP501.