
•“HCO off please” — to turn off HCO mode.
IMPORTANT:
When you are using HCO, the sound coming from your phone speaker may be uncomfortably loud. Use caution when putting the phone to your ear.
(For information on setting your phone’s speaker volume, see “Voice Volume” on page 113.)
NOTE: TTY device manufacturer’s proprietary feature such as Turbo- Code,
Setting TTY Baud Rate
NOTE: This feature may not be offered by your service provider.
By default, your phone’s TTY baud rate is set to 45.45, the baud rate required for TTY calls within the US. To make calls outside the US, set your TTY baud rate to 50.0.
To change the TTY baud rate:
1From the Initial Setup screen, press R to scroll to TTY Baud.
2Press C under CHANGE.
3Press S to scroll to the baud rate for your location.
4Press C under SELECT.
Alert Timeout
Alert timeout controls the amount of time the Call Alert tone sounds. The display will continue to show the alert information even though the Call Alert tone has stopped.
You can set your phone’s alert timeout rules from the Settings/Initial Setup screen. Scroll to the Alert Timeout option and then choose the desired interval. (No Alert Tone, 5 Minutes, 15 Minutes, 30 Minutes, 1 Hour, or Continuous.
Return to Home
You can control the amount of time that the recent call screen displays after a call. You can set different timeouts (30 seconds, 1 min, 5 min, or 10 min) for phone calls and private calls:
www.motorola.com/iden