i30sx Phone Faceplates and Keypads
When Charging Battery
Icon | e | f | g | h |
Display | 1 flashing bar | 1 flashing bar, | 1 flashing bar, | 3 continuous bars |
| ||||
|
| 1 continuous bar | 2 continuous bars |
|
|
|
|
|
|
Battery | Low | 31% - 60% | 61% - 90% | Fully Charged |
Strength | Battery |
|
| (90% |
|
|
|
|
|
NOTE: During the charging process, the battery icon will be flashing. In addition, when the battery is fully charged, the battery icon will show a fully charged battery.
i 30sx Phone Faceplates and Keypads
Your i30sx phone comes with a standard faceplate and keypad. You can order additional face plates and keypads to change the look of your phone.
The following steps and accompanying illustration detail the procedure for removing and replacing the changeable faceplate and keypad.
NOTE: Before replacing the faceplate, ensure that the keypad is present and undamaged. For security and operational reasons, power to the i30sx phone should be off prior to performing the removal and replacement procedure. There is a protective plastic liner over the lens. Peel off prior to operation.
Removal and Replacement Procedure
1While holding the back of the phone, press the faceplate release button located at the bottom of the phone to release the faceplate. When you press the release button, ensure that both sides are disengaged from the faceplate prior to removal.
Release Button
2In an upward motion, grasp the bottom part of the faceplate and detach it from the phone.
15
