Motorola i730 manual Making TTY Calls, Turning On the TTY Feature, Choosing a Mode

Advanced Calling Features

2To view a feature without resetting: Press O when you are finished viewing. -or-

To reset a feature: Press A under Reset. Press O or press A under Yes to confirm.

Note: The values displayed by Call Timers should not be used for billing. Call timers are estimates only.

Making TTY Calls

To use your phone to make phone calls using a teletypewriter (TTY) device:

1Connect one end of a 2.5mm cable into the audio jack on your phone. Connect the other end of the cable to your TTY device.

2Make sure that your phone’s TTY feature is on and select the TTY mode you want to use.

3Use your phone to enter phone numbers and make calls.

When you make a TTY call, these icons appear on the phone’s display:

NPhone call is active.

OPhone call is on hold.

TTY device features such as Turbo-Code, High-Speed, and Interruption are not supported by your phone. These features must be turned off or disabled to use your TTY device with your phone.

Turning On the TTY Feature

Your phone’s TTY feature must be on if you want to make TTY calls, set the TTY mode, or change the TTY baud rate. To make sure the TTY feature is on:

From the main menu, select Settings > Phone Calls > TTY > Use TTY. This field must say On.

Choosing a Mode

Your phone supports these TTY modes:

•TTY — You type and read text on your TTY device.

•VCO (Voice-Carry-Over) — You speak into your phone and read text replies on your TTY device.

•HCO (Hearing-Carry-Over) — You type text on your TTY device and listen to voice replies on your phone speaker.

To change mode while not in a call:

1From the main menu, select Settings > Phone Calls > TTY > Type.

2Select the TTY mode you want.

84