To cancel a Contacts entry at any time press, e to return to the idle screen.
To create a Contacts entry:
1To access the entry details screen: Select Contacts > [New Contact].
2If you want to assign a name to the entry: Select Name.
Enter the name. See “Entering Text” on page 31. When you are finished, press O.
Tip: Press A under Browse to select a name already in Contacts.
3If you want to assign a ring tone to the name: Select Ringer.
Select the ring tone you want to assign.
4To assign a Contacts type to the number or address being stored:
Select the Contacts type field.
Select the Contacts type you want to assign.
5To store a number or address:
Select the # field (or ID for an email address, or IP for an IP address).
Creating Entries
Enter the number or address. For phone numbers, use the
Tip: Press A under Browse to select a number or address from Contacts, the recent calls list, or Memo.
When you are finished, press O.
6If you want to assign more options to the number, select [Options]. See “Assigning Options” on page 37.
7If you want to add more numbers or addresses to the entry:
Scroll past the information you already entered.
Enter the additional information for the entry using step 2 through step 6. You must assign a name to the entry, if you have not already.
8Press A under Done.
Assigning Options
1If you have not already, select [Options].
2The default Speed Dial number assigned to a phone number is displayed in the Speed # field. This is always the next available Speed Dial location.
If you want to assign the phone number to a different Speed Dial location:
37
