
2 - 4 Symbol LS3478 Product Reference Guide
Scanning
See Chapter 1, Getting Started to install and program the scanner. To scan.
1. Aim the scanner at the bar code.
2. Press the scan trigger.
Figure 2-2
Aiming the Scanner
3. Ensure the scan line crosses every bar and space of the symbol.
4. The scanner beep s and the LED turns green to indicate a successful decode. See Table 2-1 and Table 2-2 for
beeper and LED definitions.
Red fast flash
(two flashes per second) Overcharge condition. Contact Motorola Enterprise Mobility Support.
Red slow flash
(one flash per second) Battery voltage not increasing with charge. Replace the battery.
Red and green flash Temperature fault. Mo ve the cradle to a location where the tempe rature is 0
o
- 40
o
C;
optimal charging temperature is 5
o
- 35
o
C.
Table 2-2
LED Status Indications (Continued)
LED Indication
012345
WRONG
012345
RIGHT